ASTM D2296 Standard Specification for Continuity of Quality of Electrical Insulating Polybutene Oil for Capacitors
ASTM D2296电容器用电绝缘聚丁烯油品质连续性
This specification provides the limits within which the properties of electrical insulating polybutene oil for capacitors shall conform to ensure an unvarying continuity in the quality and grade of polybutene oil supplied. The oil shall conform to the prescribed physical, chemical, and electrical requirements, and shall be subject to aging test.
This abstract is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date.
1. Scope
1.1 This specification provides the limits within which the properties of electrical insulating polybutene oil for capacitors shall conform in order to ensure an unvarying continuity in the quality and grade of polybutene oil supplied.
1.2 It is expected that additional laboratory or service tests of the purchaser's own choosing may be applied to polybutene oil from each source of supply before approval for use.
2. Referenced Documents (purchase separately)
ASTM Standards
D92 Test Method for Flash and Fire Points by Cleveland Open Cup Tester
D97 Test Method for Pour Point of Petroleum Products
D117 Guide for Sampling, Test Methods, and Specifications for Electrical Insulating Oils of Petroleum Origin
D445 Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
D664 Test Method for Acid Number of Petroleum Products by Potentiometric Titration
D877 Test Method for Dielectric Breakdown Voltage of Insulating Liquids Using Disk Electrodes
D878 Test Method for Inorganic Chlorides and Sulfates in Insulating Oils
D923 Practices for Sampling Electrical Insulating Liquids
D924 Test Method for Dissipation Factor (or Power Factor) and Relative Permittivity (Dielectric Constant) of Electrical Insulating Liquids
D974 Test Method for Acid and Base Number by Color-Indicator Titration
D1169 Test Method for Specific Resistance (Resistivity) of Electrical Insulating Liquids
D1275 Test Method for Corrosive Sulfur in Electrical Insulating Oils
D1298 Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
D1500 Test Method for ASTM Color of Petroleum Products (ASTM Color Scale)
D1533 Test Method for Water in Insulating Liquids by Coulometric Karl Fischer Titration
D1816 Test Method for Dielectric Breakdown Voltage of Insulating Oils of Petroleum Origin Using VDE Electrodes
D1934 Test Method for Oxidative Aging of Electrical Insulating Petroleum Oils by Open-Beaker Method
D2161 Practice for Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Saybolt Furol Viscosity
D2522 Test Method for Chlorine Content of Polybutenes Used for Electrical Insulation
D2864 Terminology Relating to Electrical Insulating Liquids and Gases
D97 Test Method for Pour Point of Petroleum Products
D117 Guide for Sampling, Test Methods, and Specifications for Electrical Insulating Oils of Petroleum Origin
D445 Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
D664 Test Method for Acid Number of Petroleum Products by Potentiometric Titration
D877 Test Method for Dielectric Breakdown Voltage of Insulating Liquids Using Disk Electrodes
D878 Test Method for Inorganic Chlorides and Sulfates in Insulating Oils
D923 Practices for Sampling Electrical Insulating Liquids
D924 Test Method for Dissipation Factor (or Power Factor) and Relative Permittivity (Dielectric Constant) of Electrical Insulating Liquids
D974 Test Method for Acid and Base Number by Color-Indicator Titration
D1169 Test Method for Specific Resistance (Resistivity) of Electrical Insulating Liquids
D1275 Test Method for Corrosive Sulfur in Electrical Insulating Oils
D1298 Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
D1500 Test Method for ASTM Color of Petroleum Products (ASTM Color Scale)
D1533 Test Method for Water in Insulating Liquids by Coulometric Karl Fischer Titration
D1816 Test Method for Dielectric Breakdown Voltage of Insulating Oils of Petroleum Origin Using VDE Electrodes
D1934 Test Method for Oxidative Aging of Electrical Insulating Petroleum Oils by Open-Beaker Method
D2161 Practice for Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Saybolt Furol Viscosity
D2522 Test Method for Chlorine Content of Polybutenes Used for Electrical Insulation
D2864 Terminology Relating to Electrical Insulating Liquids and Gases
Index Terms
capacitors; dielectric; dielectric fluid; insulating oil; oil; polybutene oil;