ASTM D2305 Standard Test Methods for Polymeric Films Used for Electrical Insulation
ASTM D2305电绝缘用聚合物薄膜的标准试验方法
Many electrical and physical properties of films vary significantly with changes in temperature and humidity. Properties of thin plastic films can change very rapidly; therefore, the specimen needs to be in the stated conditioning environment when the test is being performed. When the test is performed in a different environment, note these conditions and the time of exposure to this new environment.
1. Scope
1.1 These test methods cover the testing of homogeneous organic polymer films not over 2.4 mm (95 mils) thick that are to be used for electrical insulation.
1.2 These test methods are not necessarily applicable to testing films in combinations with a coating, another film, or with other types of substrate, such as fabrics or papers.
1.3 The values stated in SI units are the standard. The values in parentheses are provided for information only.
2. Referenced Documents (purchase separately)
ASTM Standards
D149 Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials at Commercial Power Frequencies
D150 Test Methods for AC Loss Characteristics and Permittivity (Dielectric Constant) of Solid Electrical Insulation
D257 Test Methods for DC Resistance or Conductance of Insulating Materials
D374 Test Methods for Thickness of Solid Electrical Insulation
D570 Test Method for Water Absorption of Plastics
D882 Test Method for Tensile Properties of Thin Plastic Sheeting
D883 Terminology Relating to Plastics
D1000 Test Methods for Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications
D1531 Test Methods for Relative Permittivity (Dielectric Constant) and Dissipation Factor by Fluid Displacement Procedures
D1676 Test Methods for Film-Insulated Magnet Wire
D1711 Terminology Relating to Electrical Insulation
D5032 Practice for Maintaining Constant Relative Humidity by Means of Aqueous Glycerin Solutions
D6054 Practice for Conditioning Electrical Insulating Materials for Testing
E691 Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
D150 Test Methods for AC Loss Characteristics and Permittivity (Dielectric Constant) of Solid Electrical Insulation
D257 Test Methods for DC Resistance or Conductance of Insulating Materials
D374 Test Methods for Thickness of Solid Electrical Insulation
D570 Test Method for Water Absorption of Plastics
D882 Test Method for Tensile Properties of Thin Plastic Sheeting
D883 Terminology Relating to Plastics
D1000 Test Methods for Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications
D1531 Test Methods for Relative Permittivity (Dielectric Constant) and Dissipation Factor by Fluid Displacement Procedures
D1676 Test Methods for Film-Insulated Magnet Wire
D1711 Terminology Relating to Electrical Insulation
D5032 Practice for Maintaining Constant Relative Humidity by Means of Aqueous Glycerin Solutions
D6054 Practice for Conditioning Electrical Insulating Materials for Testing
E691 Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
IEC Standard
Publication60674&nda Specification for Plastic Films for Electrical Purposes
Index Terms
conditioning; dielectric breakdown; dielectric strength; dissipation factor; elongation; extractables; FEP fluorocarbon; film; heat aging; heat-sealable; heat-seal strength; high humidity; permittivity; polymer films; strain relief (shrinkage); surface resistivity; tensile strength; thickness; volume resistivity; Conditioning--electrical insulating materials; Corrosion; Dielectric breakdown voltage; Electrical insulating plastics; Film; Heat-sealable polymeric films; Perfluoro(ethylene-propylene)(FEP) copolymer; Permittivity (dielectric constant)--electrical insulating materials; Plastic sheet and film; Polymer films; Strain testing--electrical insulating materials; Surface resistivity;