Precaution, Pretection and Safety, all in FireTC
firetc@firetc.com
 
Inquiry For Fire Testing
 
Recommended Service
Hot Fire test center
 
Your location: Home » Fire test center » Standards & Regulation » USA » Text

ASTM C1258 Standard Test Method for Elevated Temperature and Humidity Resistance of Vapor Retarders for Insulation

Zoom  Zoom Issue Date:2012-02-13   Browse:1257
ASTM C1258隔热用蒸汽缓凝剂耐高温和耐湿度性能标准试验方法
ASTM C1258 Standard Test Method for Elevated Temperature and Humidity Resistance of Vapor Retarders for Insulation
ASTM C1258隔热用蒸汽缓凝剂耐高温和耐湿度性能标准试验方法
On sub-ambient temperature systems, humid ambient conditions cause a vapor driving force toward the insulation which, if not retarded, is detrimental to the insulation's thermal resistance. Therefore a vapor retarder should resist degradation. Degradation in this test method is induced by elevated temperature and humidity conditions.
1. Scope
1.1 This test method covers the determination of the aging resistance of flexible low permeance vapor retarders for thermal insulation as classified in Specification C 1136. Water vapor permeance measurement and visual inspection after exposure at elevated temperature and humidity are used to assess vapor retarder response.
1.2 Typical vapor retarders applicable to this test method that are intended for indoor use include foil-scrim-kraft laminates, metallized polyester-scrim-kraft laminates, treated fabrics, treated papers, films, foils, or combinations of these materials that may comprise a vapor retarder material. This test method is not intended for assessment of the liquid-applied coatings, sealants, or mastics commonly used with insulation products.
1.3 The values stated in inch-pound units are to be regarded as standard. The SI units given in parentheses are for information purposes only.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents (purchase separately)
ASTM Standards
C168 Terminology Relating to Thermal Insulation
C1136 Specification for Flexible, Low Permeance Vapor Retarders for Thermal Insulation
E96/E96M Test Methods for Water Vapor Transmission of Materials
Index Terms
orrosion; humid aging; insulation; vapor retarder; water vapor permeance; Aging resistance; Corrosion--insulating materials; Humid aging; Insulation; Water vapor permeability; Water vapor retarders;
 
 
[ Fire test center Search ]  [ ]  [ Forword to friends ]  [ Print ]  [ Close ]  [ Back to Top ]

 

 
 
Home | About us | Contact | Terms & Conditions | Copyright | Site Map | Friend link | Guestbook | Old Version | 闽ICP备09009213号
©2013-2015 FIRETC.NET All Rights Reserved   ICP:闽ICP备09009213号-4