Precaution, Pretection and Safety, all in FireTC
firetc@firetc.com
 
Inquiry For Fire Testing
 
Recommended Service
Hot Fire test center
 
Your location: Home » Fire test center » Building Material » Text

ISO 834-6 Specific requirements for loadbearing beams

Zoom  Zoom Issue Date:2020-03-17   Browse:448
 
ISO834-6 Fire Test to Building Material –Standard
ISO 834-6 Fire-resistance tests-Elements of building construction-Part 6: Specific requirements for loadbearing beams 

ISO834-6 Fire Test to Building Material –Scope
This part of ISO 834 specifies the procedures to be followed for determining the fire resistance of beams, when tested on their own.
Beams are normally tested with their underside and two vertical sides fully exposed to heating. However, when the exposure is from four sides or less than three sides, appropriate exposure conditions are necessary. Beams which are part of a floor construction are tested with the floor construction as described in ISO 834-5 and are subject to evaluation of integrity and insulation.

ISO834-6 Fire Test to Building Material –Time-Temperature Curve:
Ambient at 0 min
538℃ at 5min
704℃ at 10min
843℃ at 30min
927℃ at 60min
1010℃ at 120min
1093℃ at 240min
1260℃ at 480min or over

ISO834-6 Fire Test to Building Material –– Relative Standard 
BS 476-20:Fire Tests on Building Materials and Structures Part 20: Method for Determination of the Fire Resistance of Elements of Construction (General Principles)
BS 476-21:Fire Tests on Building Materials and Structures Part 21: Methods for Determination of the Fire Resistance of Load bearing Elements of Construction
BS 476-22:Fire Tests on Building Materials and Structures Part 22: Methods for etermination of the Fire Resistance of Non- Load bearing Elements of onstruction
BS 476-23:Fire Tests on Building Materials and Structures Part 23 Methods for Determination of the Contribution of Components to the Fire Resistance of a Structure
ASTM E 119 Standard test method for Fire tests of building construction and materials
EN 1363-1: Fire resistance tests - Part 1: General requirements.
EN 1364-1: Fire resistance tests for non-loadbearing elements - Part 1: Walls.
EN 1364-2: Fire resistance tests for non-loadbearing elements - Part 2: ceiling.
EN 1365-2: Fire resistance tests for loadbearing elements - Part 2: Floors and roofs.
GB 16809:Fire resistance tests for fire window.
GB/T 24573:Fire resistance tests for coffers and Archives door.
GB/T 9978-1 Fire-resistance tests-Elements of buidling construction-part1:General requirements
GB/T 9978-3 Fire-resistance tests-Elements of buidling construction-part3:Commentary on test method and test data application.
 
 
 
[ Fire test center Search ]  [ ]  [ Forword to friends ]  [ Print ]  [ Close ]  [ Back to Top ]

 

 
 
Home | About us | Contact | Terms & Conditions | Copyright | Site Map | Friend link | Guestbook | Old Version | 闽ICP备09009213号
©2013-2015 FIRETC.NET All Rights Reserved   ICP:闽ICP备09009213号-4