Click image to view original picture
1. high Adhesion Strength
2. super Holding Power
3 good Conductivity
4. CTI certificated.
Aluminum foil fiberglass cloth for fire-retarding
| Item No. | ALU-450F | ||||||
| WEAVE | Plain | ||||||
| THREAD COUNT | WARP | 18 per cm | 45 per inch | ||||
| WEFT | 13 per cm | 33 per inch | |||||
| WIEIGHT | 450 g/m2 | 13.2 OZ/YD2 | |||||
| THICKNESS | 0.5 mm | 0.02 inch | |||||
| COATING | Metalized film | ||||||
| COATING THICKNESS | 7micron | ||||||
| TENSILE | WARP | 2250 N/5cm | 250 lbs/inch | ||||
| STRENGTH | WEFT | 1620 N/5cm | 180 lbs/inch | ||||
| WIDTH | 101.6cm | 40 inch | |||||
| SERVICE TEMPERATURE | Kevlar is fire-resistance | ||||||
Product De
This is a new environmentally-friendly heat insulation material, which is soft, light and easy to install.To glass cotton, rock wool, mineral wool PEF products and xiangsu products of adiabatic material such as heat sealing moisture barrier layer, bracket and carpet, cotton board for cotton and cotton pipe and PEF board tube rubber board tube online hot sealing joint meet hvac duct, changes in temperature and moisture resistance of adiabatic conduit between need and construction thermal insulation needs, make indoor warm in winter and cool in summer, the four seasons is comfortable.
Characteristics:
1, corrosion resistance greatly improve: glass fiber cloth aluminum foil surface by the special anti-corrosion coating processing, corrosion resistance to rise greatly. The simultaneous polyethylene hot, and it does not need to stick with legal compound adhesive, eliminating the composite process or solvent residual moisture adhesive triggered aluminum foil surface corrosion mildew hidden trouble.
2, direct hot-pressing compound, dispense with compound adhesive, saving temps composite cost.
3, water vapor permeability smaller, more strengthened the vapor barrier effect: glass fiber cloth aluminum heat sealing polyethylene layer among the thick than average, water vapor permeability bracket more small, so water vapor barrier effect is better, reliably protective glass insulation materials such as cotton.
4, tensile strength better and cover more tinggua: glass fiber cloth reinforced aluminum foil than clip of high mechanical strength, more suitable for glass cotton plant, rock wool factory, mineral wool factory online joint.
5, cover more plain, reduce the aluminum foil surface damage probability: glass fiber cloth due to close, polyethylene foil comtroller layer thickness, cover more level off, aluminum foil surface are less vulnerable to friction damage, so as to better play a vapor barrier function.
1:Excellent quality.
2:24-hour online sevice.
3:Tailor-made.
4:Small order accepted.
Usage:
1. Roof, wall, floor;
2. Shells of air conditioner and water heater;
3. Protective coatings of water pipe and ventilating pipe
