16 CFR 1633 Fire Test(Open Flame) to Mattresses

16 CFR 1633 Fire Test(Open Flame) to Mattresses

Ecosafene have rich experience to provide 16 CFR 1633 Fire Test(Open Flame) to Mattresses and Mattress/ Foundation Sets.

16 CFR 1633 Fire Test to Mattresses and Mattress/ Foundation Sets– Standard

16 CFR Part 1633 Standard for the Flammability (Open Flame) of Mattresses and Mattress/ Foundation Sets

16 CFR 1633 Fire Test to Mattresses and Mattress/ Foundation Sets– Purpose

This part 1633 establishes flammability requirements that all mattress sets must meet before sale or introduction into commerce. The purpose of the standard is to reduce deaths and injuries associated with mattress fires by limiting the size of the fire generated by a mattress set during a thirty minute test.

16 CFR 1633 FireTest to Mattresses and Mattress/ Foundation Sets– Summary of test method

The test method set forth in § 1633.7 measures the flammability (fire test response characteristics) of a mattress specimen by exposing the specimen to a specified
flaming ignition source and allowing it to burn freely under well-ventilated,controlled environmental conditions.The flaming ignition source shall be a pair of propane burners. These burners impose differing fluxes for differing times on the top and sides of the specimen.During and after this exposure,measurements shall be made of the time-dependent heat release rate from the specimen, quantifying the energy generated by the fire. The rate of heat release must be measured by means of oxygen consumption calorimetry.

16 CFR 1633 Fire Test to Mattresses and Mattress/ Foundation Sets–Technical requirements

(i) The peak rate of heat release shall not exceed 200 kilowatts ("kW") at any time within the 30 minute test;

(ii) The total heat release shall not exceed 15 megajoules ("MJ") for the first 10 minutes of the test.

16 CFR 1633 FireTest to Mattresses and Mattress/ Foundation Sets - Relative Standard

16 CFR PART 1632—STANDARD FOR THE FLAMMABILITY OF MATTRESSES AND MATTRESS PADS
TB 106 Requirements, Test Procedure and Apparatus for Testing the Resistance of a Mattress or Mattress Pad to Combustion Which May Result from a Smoldering Cigarette
TB 121 Flammability Test Procedure for Mattresses for Use in High Risk Occupancies
TB 129 Flammability Test Procedure for Mattresses for Use In Public Buildings 
NFPA 267 Fire characteristics of mattresses and bedding assemblies exposed to flaming ignition source
ASTM E1590 Standard test method for Fire testing of mattresses (open flame)
TB 604 Test Procedure and Apparatus for the Open Flame Resistance of Filled Bedclothing

Best Regards
Kitty Li
Sales Executive
Ecosafene Product Service Co.,Ltd
1812 Gangmao Mansion, No.22 Xingqian Road, Jimei,
Xiamen 361022, China
E-mail:mail@ecosafene.com
Tel: (+86) 0592 5056211
Fax : (+86) 0592 5105807
http://www.ecosafene.com