Sell Fire Retardant PC

(a) Fire Retardant PC
(b) Meet UL V-0 Standard
(c) Great Flame Retardant Property
(d) Good high-low temp.impact resistant

Fire Retardant PC      PC-FR01

 

Features

(1) UL V-0  

(2) High strength & Outstanding over-all properties

(3) Good high-temperature resistance

(4) Colorful appearance

(5) Good high-low temperature impact resistance

Application

(1) Plug & Socket

(2) Electrical Appliance Controller

(3) Shell of Electrical household Appliance

(4) Shell of Electric Meter

Properties

Test Project	Test Methods	Unit	Typical Values [1]
Tensile Stress	GB/T1040-92	Mpa	≥50
Flexural Stress	GB/T9341-2000	Mpa	≥100
Flexural Modulus	GB/T9341-2000	Mpa	≥1500
Notched Impact Strength	GB/T1043-93	KJ/m2	≥20
Elongation At Break	GB/T1040-92	%	≥100
Heat Distortion Temperature	GB/T1634-2004	°C	110-120
MFR	GB/T3682-2000	g/10min	8-18
Oxygen Index (Vertical Burning)	GB/T2408-1996	4mm	≥28
Testing Condition	23±2°C, 50±5%RH

[1] Typical Values are average statistics in lab for reference. They are not used as products standards.

[2] Properties of coloring materials may be different from the above statistics.

Processing Conditions

		Start Point	Range
Melt Temp		230°C	220-240°C
Barrel Zone Temp.	Rear	215°C	210-230°C
	Center	225°C	200-230°C
	Front	235°C	220-240°C
Mold Temp.		70°C	60-100°C
Processing Temp. Limit		260°C
Injection Speed		60-90%
Back Pressure		0-1.0MPa
Pre-Dry Requirements		90-100°C, 3-6hr

Note All the statistics above are for reference and can be adjusted according to different requirements