1.IEC standard,maufacturer
2.copper & aluminum conductor
3. PVC&XLPE insulated, jacket,armour
4.welcome to visit our factory
PVC Insulated Power cable
1.Main application
This cable is suitable to be installed in transmission and distribution lines of rated voltage up to and including 0.6/1kV.The mechanical and electrical properties of these cables are accordant with GB/T12706-2002 Power cables extruded insulation and their accessories of rated voltages 1kV(Um=1.2kV)up to 35kV(Um=40.5kV)and IEC60502-1997 Extruded insulation power cables and appendices for rated voltages 1kV up to 30kV.
2. Properties of products
2.1 Max. continuous operating temperature of conductor is 70°C.
2.2 Max. Short circuit conductor temperature (max. 5 sec) 160°C.
2.3 The installation temperature should not over 0°C,if the ambient temperature is lower than 0°C,the cable should be preheated ,the bending radius of cable should not less than 10-15 times .
3. Type,de
Type |
De |
Application |
|
Cu |
Al |
||
VV |
VLV |
PVC insulated PVC sheathed power cable |
Suitable for indoor, channels, conduits. Unable to bear mechanical stress. |
VY |
VLY |
PVC insulated PE sheathed power cable |
|
VV22 |
VLV22 |
PVC insulated steel-tape armored PVC sheathed power cable |
Suitable for under ground, can bear mechanical stress, but can not endure large pulling force. |
VV23 |
VLV23 |
PVC insulated steel-tape armored PE sheathed power cable |
|
VV32 |
VLV32 |
PVC insulated fine steel-wire armored PVC sheathed power cable |
Can be installed in vertical well, and bear large mechanical pulling force. |
VV42 |
VLV42 |
PVC insulated steel-wire armored PVC sheathed power cable |
|
VV33 |
VLV33 |
PVC insulated fine steel-wire armored PE sheathed power cable |
|
VV43 |
VLV43 |
PVC insulated steel-wire armored PE sheathed power cable |
Note: We can produce flame-retardant, fire-resistant, anti-termite, LSZH, small smoke and low halogen cables according to customer's requirements. 1. Flame-retardant power cable: add "ZRA-, ZRB-, and ZRC-"before above model no. 2. Fire-resistant power cable: add "NH-"before above model no. 3. LSZH power cable: add "DWZR-"before above model no. 4. Small smoke and low halogen power cable: add "DDZR-"before above model no.