Sell Black Silicon Carbide for Refractory Material

Black Silicon Carbide
Professional manufacturer
Excellend quality
Superior quality services
Passed REACH ,ISO-9001

Refractory Material Black Silicon Carbide

Black silicon carbide is produced at high temperature in an electric resistance type furnace with quarts sand and petroleum coke as its main raw materials. Its hardness is between fused alumina and synathetic diamond. Mechanical intensity of it is hig-her than fused alumina.it is brittle and sharp and has electrical and heat conductivity in some degree. The abrasives made of it are suitable for working on cast iron, non-ferrous metal, rock, leather, rubber, etc. It is also broadly used as refractory material and metallurgical additive

Chemical Compsition (%)

Grit	Sic	F.C.	Fe2O3
F12-F90	≥98.50	<0.20	≤0.60
F100-F150	≥98.00	<0.30	≤0.80
F180-F220	≥97.00	<0.30	≤1.20
F230-F400	≥96.00	<0.40	≤1.20
F500-F800	≥95.00	<0.40	≤1.20
F1000-F1200	≥93.00	<0.50	≤1.20
P12-P90	≥98.50	<0.20	≤0.60
P100-P150	≥98.00	<0.30	≤0.80
P180-P220	≥97.00	<0.30	≤1.20
P230-P500	≥96.00	<0.40	≤1.20
P600-P1500	≥95.00	<0.40	≤1.20
P2000-P2500	≥93.00	<0.50	≤1.20

Physical Index

Grits	Bulk Density g/cm3	High Density g/cm3	Grits	Bulk Density g/cm3	High Density g/cm3
F16 ~ F24	1.42~1.50	≥1.50	F100	1.36~1.45	≥1.45
F30 ~ F40	1.42~1.50	≥1.50	F120	1.34~1.43	≥1.43
F46 ~ F54	1.43~1.51	≥1.51	F150	1.32~1.41	≥1.41
F60 ~ F70	1.40~1.48	≥1.48	F180	1.31~1.40	≥1.40
F80	1.38~1.46	≥1.46	F220	1.31~1.40	≥1.40
F90	1.38~1.45	≥1.45

Size Available

F12-F1200,P12-P2500

 0-1mm,1-3mm,6/10, 10/18, ,200mesh,325mesh

Other special spec. could be supplied as required.

Applications

• Grinding non-ferrous materials, rock, stone, leather, rubber, finishing tough and hard materials.
• Bonded  Abrasive tools, lapping and poishing.
• Widely used as a metallurgical additive and refractory material.