Click image to view original picture
for steel coating
1.High cohesive strength, solid and durable
2.Oil, salt resistance
3.Moisture and heat resistance
4.ISOCE
Cable Fire Retardant for steel anti fire proofing coating
Product Introduction:
Cable Fire Retardant Coating is the resin film agent combined with other materials. When sprayed to the cable surface, it has obvious fire-proofing property. It can stop cable fire from spreading and reduce the damages caused by the outside fire. Additionally, it has certain decoration effect.
| De |
Cable Fire Retardant Coating |
| Features | 1. High cohesive strength, solid and durable |
| 2. Oil, salt, moisture and heat resistance | |
| 3. Good weather resistance, non-aging | |
| 4. Long fire endurance | |
| Using Instruction | 1. The surface to be coated should be clean and free of dust and oil before using |
| 2. Solid content of the coating is high, so there would be sediment. The coating should be well stirred before using | |
| 3. Brushing and spraying methods are all available. If the coating is too thick, solvent can be used to dilute the coating (10:1). Brush the coating again each four hours | |
| 4. Brushing thickness depends on the real fire-proofing requirements. Normally, dry coating thickness is more than 1mm | |
| 5. 1KG of coating is used for 1 square meter of cable surface with the thickness of 0.5mm | |
| 6. Coating solvent is volatile inflammable substance, so pay attention to ventilation during the construction |
Technical Performance Indexes:
| Items | Technical Indexes | Test Results |
| Status in the container | Even after mixing | No clotting, white thick fluid |
| Fineness, μm | Equal or less than 90 | 90 |
| Viscosity, S | Equal or greater than 70 | 85 |
| Dry time, H | Surface dry: Equal or less than 5 | 0.5 |
| Hard dry: Equal or less than 24 | 1 | |
| Oil resistance, d | After soaking 3d, the coat has no crinkle, fall-off and bubble. It can recover within 24 hours under normal environmental conditions. Light color changes are allowed. | Soak 7d, qualified |
| Salt resistance, d | After soaking 7d, the coat has no crinkle, fall-off and bubble. It can recover within 24 hours under normal environmental conditions. Light fading is allowed. | Soak 3d, qualified |
| Humid-heat durability, d | After soaking 7d, the coat has no crinkle and fall-off. Light fading is allowed. | Soak 7d, qualified |
| Cold-heat-circulation resistance | After 15 circulations, the coat has no bubble and fall-off. Less than two cracks are allowed. | 15 circulations, qualified |
| Bending resistance | The coat has no aliquation and fall-off. Less than eight cracks are allowed. | Qualified |
| Fire resistance, m | Charring height is equal or less than 2.5. | 0.48 |
