Supply Pro-environment Flame Retardance ABS Granules (ABS-R)

flame retardant abs
1. chemical flame retardant abs, pro-environment flame retardance ABS Granules
2. high tenacity

flame ratardant abs

Testing Condition	23±2°C, 50±5%RH
Test Project	Test Methods	Unit	Typical Values
Tensile Stress	GB/T1040-92	Mpa	28-40
Flexural Stress	GB/T 9341-2000	Mpa	48
Flexural Modulus	GB/T9341-2000	Mpa	≥1600
Impact Strength	GB/T1043-93	KJ/m2	≥10
Elongation At Break	GB/T1040-92	%	40-80
Heat Distortion Temperature	GB/T1634-2004	°C	≥85
MFR	GB/T 3682-2000	g/10min	10-40
Flame Retardance	GB/T 2408-1996		V-0

Dyes materials characters will be different from above value.

Typical values are for average laboratory data. It is only suit for utilizing reference, not on products standard.

Processing Conditions

Start Point                           Range

Melt Temp.   220°C              200-230°C

Barrel Zone Temp.       

Rear      190°C              180-210°C

Center     205°C              190-220°C

Front      215°C              200-230°C

Mold Temp.                              50°C               30-60°C

Processing Temp. Limit                         245°C

Injection Speed                           Slow to Moderate

Pre-Dry Requirements                           70-80°C,   2hr

Above values only refer to injection machinery. We can adjust it suitable on your requests according to different machine shape,different mold and products.

Note: We could produce the products according to the client’s request!