Supply Reflective Silver Flame Retardant Tape- FR-120AF(EN469)

FR-120AF(EN469) reflective industrial wash flame retardant fabric has glass beads on top with a flame retardant T/C.

GIO-LITE FR-120AF reflective industrial wash flame retardant fabric has glass beads on top with a flame retardant durable T/C (65% polyester + 35% cotton) cloth backing.

it is 100% ANTI-FRAYING Quality with industrial Wash Standard which enhances the finished garments.

 

 

COMPOSITION

Glass bead	30%
Resin	30%
Backing Cloth	30%
Others	10%

RETROREFLECTIVE PERFORMANCE

BS EN 471 table 5, class 2 High Visibility Warning Clothing for professional use Test methods and requirements

Observation angle	Entrance angle	Test Result (cd/lux.m2)	Minimum coefficient of retoreflection in cd/lx.m2
12’	5 degree	500	330

PHYSICAL PERFORMANCE AFTER TEST EXPOSURE

BS EN 471 : 2003 clause 6.2.1 High Visibility Warning Clothing for professional use Test methods and requirements

After abrasion	BSEN 530:1991 Method 2 - 5000 rubs
After flexing	ISO 7854:1984 Method A - 7,500 cycles
After folding at cold temperatures	ISO 4675: 1990 (-20 degree C)
During rainfall	EN471: Annex A
After temperature variation	12 hours @50+/-2 degree C, 20 hours@ -30+/-2 degree C. cond. > 2 hrs.
After washing	ISO 6330:1984 Method 2A@60 degree C; dried stress-free at 50+/-5 degree C.- 25 cycles

BS EN 532 : 1995 Clothing for protection against heat and flame- Method of test for Limited Flame Spread
BS EN 533 : 1997 Protective clothing-Protection against heat and flame-Limited flame spread materials and clothing
(Conditioning atmosphere : 20 degree, 64% RH)

BS EN 469 : 1995 clause 6.5 Protective clothing for firefighters-Resistance to heat

Exposure	results	spec.min
Retroreflective performance after exposure to heat @180 degree C/5 minutes	500 (cd/lx.m2)	100
Resistance to heat @180 degree C/5 minutes	samples did not melt, drip or ignite shrinkage was not more than 5%	material shall not melt, drop or ignite and shall not shrink more than 5%

APPLICATION INSTRUCTIONS

Sewing	More than 2mm from the edge of the reflective fabric is required  No more than 12 stitches per inch (2.54 cm)
Sewing Thread	100% Polyester is recommended.

Home Wash

Washing

Washer : Standard household washing machine
Temperature : 60 degree C
detergent : standard household detergent
Setting : colored clothing without pre-wash

Maximum washing time on highest temperature not to exceed 12 minutes.
Maximum total washing time not to exceed 50 minutes.
Test fabric for dye migration.

Bleaching

Not recommended

 

Drying

Tumble dry low

 

Dry cleaning

Normal cycle

 

Ironing

Do not use steam, use a cool or warm temperature setting, avoid direct contact of the tape when ironing, use a press cloth

Industrial Wash

Use low-to medium-alkaline, high-surfactant detergents.
DO NOT use detergents that contain free sodium hydroxide or potassium hydroxide.
DO NOT use solvenated surfactants.
DO NOT use chlorine or perborate bleach.

Maximum wash temperature : 75 degree C
Tunnel dry : Tunnel input temperature must not exceed 100°C
Tumble dry : Maximum exhaust stack temperature 90°C

* IMPORTANT NOTICE : Keep away from the Acetone and solvent type chemicals

SPECIFICATION

Standard Width	Roll Length	Q'ty /carton	Weight / carton	Volume / carton
1000 mm	50 mts	50 mts	32 kgs	0.056 CBM
50 mm	50 mts	800 mts	24 kgs	0.039 CBM

STORAGE

Keep away from the direct sunlight, hot and humid place.
Use within 1 year after the date of the lot number (production date).