Click image to view original picture
European Directive:95/28/EC Fire Test to Motor Vehicle
Ecosafene Products Service Co.,Ltd have rich experience to provide 95/28/EC fire test to Motor Vehicle
95/28/EC Fire Test to interior material of motor vehicle
EC Directive 95/28/EC relates to “the burning behaviour of materials used in the interior construction of certain categories of motor vehicles”, and is intended to ensure that they meet fire safety standards.
95/28/EC fire test to interior material of motor vehicle to determine the Characteristic of Burning:
Horizontal Burning Behaviour
Vertical Burning Behaviour
Burning Dropping
95/28/EC－Fire Test to interior material of motor vehicle – Horizontal burning rate:
Materials used for the upholstery of a seat and its accessories, for interior lining, for thermal and /or sound insulation and for light fittings must satisfy the requirements of this test.
The time required for a flame to pass between the two measuring points (burning distance) or for it to extinguish after passing the first measuring point is recorded.If the flame extinguishes before it reaches the second measuring point then the burnt distance up to the point where the flame is extinguished is recorded. The sample passes the test if, on the basis of the worst result, the horizontal burning rate does not exceed 100 mm per minute or if the flame extinguishes before the last measuring point is reached.
95/28/EC－Fire Test to interior material of motor vehicle – melting behaviour
Materials used for the interior lining of the roof and adjoining parts must pass the drop test.
If the sample ignites within the first 5 minutes of the test then the radiator is swivelled away after 3 seconds until the flame extinguishes. After the first 5 minutes or after the sample flame has extinguished the radiator is left in position, whether ignition takes place or not, for the remaining period. The sample passes the test if any drops generated fail to ignite the cotton wool 300 mm beneath the sample during any of the test performances.
95/28/EC－Fire Test to interior material of motor vehicle – vertical burning rate
Materials for curtains, blinds and similar hanging materials must satisfy the requirements of the testto determine the vertical burning rate of materials.
The time from application of the flame to the severance of the three marker threads is measured. The maximum burning rate is used for calculation purposes. The sample passes the test given in Annex VI if, on the basis of the worst result, the vertical burning rate does not exceed 100 mm per minute
95/28/EC –Fire test to interior mateiral of motor vehicle - Relative Standard
FMVSS 302 Flammability of Interior materials
GB 8410 Flammability of automotive interior materials
SAE J369: Flammability of Polymeric Interior Materials Horizontal Test Method
TL1010: Flammability
ISO 3795:Road vehicles, and tractors and machinery for agriculture and forestry -- Determination of burning behaviour of interior materials
DIN 75200:Determination of burning behaviour of interior materials in motor vehicles
they meet fire safety standards
NF P 92-505: Safety against fire - Building materials - Reaction to fire tests - Test used for thermal melting materials - Dripping test.
U.T.A.C 18-502 T1: burning behaviour of materials used in the interior construction of certain categories of motor vehicles
BMW N 60121.0: BMW standard
DBL 5307: Benz Standard
GM L-T06-302G-79: GE Standard
Mitsubishi ES-X60410: Oxygen Index
VW TL 1010: burning behaviour
Volvo STD 5031: burning behaviour
Best Regards
Kitty Li
Sales Executive
Ecosafene Product Service Co.,Ltd
1812 Gangmao Mansion, No.22 Xingqian Road, Jimei,
Xiamen 361022, China
E-mail:info@ecosafene.com
Tel: (+86) 0592 5056211
Fax : (+86) 0592 5105807
http://www.ecosafene.com/EN/firetesting/motorvehicle/271.html
