Click image to view original picture
Ecosafene Products Service Co.,Ltd provide EN45545-2 fire test to railway vehicles.
EN 45545-2 Fire test to cable- Standard
EN45545-2: Fire protection of railway vehicles - Part 2: Requirement for fire behaviours of materials and components - R15 / R16
EN 45545-2 Fire test to cable- General
Electrical cables which satisfy the fire safety requirements of EN 50306, EN 50264 or EN 50382 are considered to satisfy the requirements of R15 and R16 for the corresponding hazard level (no further testing required).
EN 45545-2 Fire test to cable - Requirement
EN 45545-2 R15 Cables for interior
|
Test Method |
Requirement |
||
|
HL1 |
HL2 |
HL3 |
|
|
EN 60332-1-2 |
burned part ≤ 540 unburned part > 50 |
burned part ≤ 540 unburned part > 50 |
|
|
EN 60332-3-24 （D≥12mm） |
<2.5m |
<2.5m |
<2.5m |
|
Clause 9.1.1 （6 < D < 12 mm） |
<2.5m |
<2.5m |
<2.5m |
|
EN 50305 Clause 9.1.2 （D ≤ 6 mm） |
<1.5m |
<1.5m |
<1.5m |
|
EN 61034-2 |
- |
>25% |
>50% |
|
EN 50305 Clause 9.2 ITC |
<10 |
<10 |
<6 |
EN 45545-2 R16 Cables for exterior
|
Test Method |
Requirement |
||
|
HL1 |
HL2 |
HL3 |
|
|
EN 60332-1-2 |
burned part ≤ 540 unburned part > 50 |
burned part ≤ 540 unburned part > 50 |
burned part ≤ 540 unburned part > 50 |
|
EN 60332-3-24 （D≥12mm） |
<2.5m |
<2.5m |
<2.5m |
|
EN 50305 Clause 9.1.1 （6 < D < 12 mm） |
<2.5m |
<2.5m |
<2.5m |
|
EN 50305 Clause 9.1.2 （D ≤ 6 mm） |
<1.5m |
<1.5m |
<1.5m |
|
EN 61034-2 |
>25% |
>50% |
>70% |
|
EN 50305 Clause 9.2 ITC |
<10 |
<10 |
<6 |
EN 45545-2 Fire test to cable – Reference Standard
EN 50306 Railway rolling stock cables having special fire performance
EN 50264 Railway rolling stock power and control cables having special fire performance
EN 50382Railway rolling stock high temperature power cables having special fire performance
EN 60332-1-2, Tests on electric and optical fibre cables under fire conditions — Part 1-2: Test for vertical flame propagation for a single insulated wire or cable — Procedure for 1 kW pre-mixed flame
EN 60332-3-24Tests on electric and optical fibre cables under fire conditions - Part 3-24: Test for vertical flame spread of vertically-mounted bunched wires or cables -Category C
EN 61034-1, Measurement of smoke density of cables burning under defined conditions -Part 1: Test apparatus
EN 61034-2, Measurement of smoke density of cables burning under defined conditions - Part 2: Test procedure and requirements
EN 50305Railway rolling stock cables having special fire performance -Test methods
>> We work with fireTC and also can provide the following service of fire test
> Fire test to railway components: BS 6853, DIN 5510-2, NF F 16-101, UNI CEI 11170-3, NFPA 130, EN 45545-2, UIC 564-2.
> Fire test to buidling material: EN 13501-1, DIN 4102, BS 476, NF P 92-501, GB 8624, GB 20286
> Fire test to marine equipment: IMO FTPC, Wheelmark, USCG
> Fire test to aircraft material: FAR 25, BSS 7239, BSS 7238, ASTM E 662
> Fire test to interior material of motor vehicles: 95/28/EC, GB 8410, FMVSS 302, ISO 3795
